CHAPTER-5 output. Fig: Overview of the project showing outputs

                                          CHAPTER-5 RESULTS                                                                                                    RESULTS GENERALPARAMETERS:                The intension of the project is to control theenvironmental parameters in Greenhouse. In our Project we are using differentsensors for controlling the environmental parameters like temperature, humidityand carbon dioxide gas in Greenhouse. EXPERIMENTALMODEL:                  In the experimental model, thehardware consists ARM7 processor LPC2148 along with Temperature sensor LM35, Humiditysensor and Carbon dioxide gas sensor MQ-7 to measure the parameters oftemperature, carbon dioxide and humidity respectively.  Also the project consists Relay unit, WIFImodule and LCD display for obtaining output.                                Fig: Overview ofthe project showing outputs                      The results can be displayedthrough LCD display and also we can read the results in our mobile through WIFImodule used in our project.                                                  It is a wirelesssensor network with additional hardware and software which is solution forGreenhouse control and also can be operated using WIFI.                          Also, the user canutilize cell phone to set sensor parameters from wherever by sending settingcharge message to GSM module.

The system can be turned ON or OFF just bysending a message. TECHNICALPARAMETERS:                       The sensor cluster consists of three sensors. They areTemperature sensor LM35, Humidity sensor and carbon dioxide gas sensor. Thesesensors will be connected to the processor which screens the sensors and givessimple yield i.

e., variable voltage yield. By using simple ADC themicrocontroller changes over simple flag to advanced shape.  TEMPERATURESENSOR (LM35):                            The temperaturesensor gives variable yield voltage regarding temperature variety. LM35 isutilized as temperature sensor which is an exactness coordinated circuit temperaturesensor calibrated specifically in degree Celsius (centigrade) linear +10.

0 mv/cscale factor which is suitable for remote applications.                                         The operatingtemperature range of temperature sensor is -55 to +150 degrees Celsius. Theoutput voltage varies by 10mv in response to every Celsius rise or fall intemperature.                                                           The scale factorof temperature sensor is 0.01V/c.If the temperature is 0 degrees Celsius theoutput of sensor is 0V likewise if the temperature is 25 degrees Celsius theoutput of the temperature sensor is +250mv.If the temperature is 50 degree Celsiusthe output of the temperature sensor is +500mv.

                     a                                             Here we will set the basetemperature incentive to 20 degrees and extreme temperature esteem to 30degrees Celsius. So, the minimum and maximum temperature range is 20 to 30degrees Celsius.                    If the temperature exceeds 30degrees the relay 2 will be open and opens the cooler switch. If thetemperature falls to beneath the level the relay 1 will make the cooler switchoff and on the warmer.   HUMIDITYSENSOR:                     Humidity sensor is used tocalculate the amount of water content in the environment.

The sensor yield willbe a variable voltage as for humidity level.                     SY-HS-220 humidity sensoris utilized which can change over relative humidity yield voltage withoperating humidity 30% -90% RH and exactness is +5%RH(at 25 C).   RATEDVOLTAGE                                                                DC5.0VCURRENTCONSUMPTION                                                <3.0mAOPERATINGTEMPERATURE RANGE                              0-60°COPERATINGHUMIDITY RANGE                                       30-90%RHSTORABLETEMPERATURE RANGE                              -30°C~85°CSTORABLEHUMIDITY RANGE                                        within95%RHSTANDARDOUTPUT RANGE                                            DC1.980mV (at25°C, 60%RH)ACCURACY                                                                            ±5%RH (at 25°C, 60%RH)REMARKS                                                                            PCB unit containing driving circuit                      In normal conditions the humiditywill be around 70%. In our module we set atleast level to half and most extremelevel to 65%. If the humidity exceeds the threshold the drier fan can be ON byusing relay switch.

If the humidity falls beneath level then the relay switch ONthe water sprinkler. CARBONDIOXIDE(GAS)SENSOR:                            This sensor is utilized to detectconvergence of carbon dioxide in greenhouse.MQ-7 sensor is utilized as CO2sensor which is high affectability to LPG, petroleum gas, affectability toliquor and smoke. Carbon dioxide concentration discovery go to 200ppm to1000ppm.                                                      Convergence of CO2measured in PPM or %. If the centralization of C02 is upper limit level relay5is turned ON and it opens ventilator.

If the CO2 level is beneath the thresholdthen the relay6 closes the ventilator.                                              This sensor is additionallyutilized as gas sensor to recognize smoke if happens in greenhouse. Thearchitecture is designed in keil software.

Fig: Tabularform showing greenhouse parameters        FOREXAMPLE:                            Let us consider some vegetablefarms and their temperature ranges and humidity variations.          Form wise humidity and carbon dioxideparameters values are given below.  Temperaturesensor parameters for different types of vegetable farms given below. Tableshowing temperature parameters. Inthis way, the values can be obtained by using these sensors. The readings willbe displayed in the LCD display panel.

These values can be sent to the mobilethrough wifi module by sending IP address. Hence, we can see the condition ofgreenhouse in mobile. TESTCASE:              We can connect the processor to themobile or pc to see the output values of the sensor. Operation: 1)  First connect wifi module.                      using wifi  in  your mobile  connect to wifi module.

                       password 12345678.2) Open connection terminal app in ur mobile.3) Click on configuration , select network,  select client.4)  Server address  192.168.16.

254.                              serverport 8080. 5) Tick all the checkboxes                               click on connect.                              you will connect to wifi module. 6) Go to terminal                         Tickall the check boxes.